INSTALLING THE WALL MOUNT
Installation Precautions
•Install on a vertical wall only.•Do not install the Soundbar system in a location with high temperature and/or humidity. Install the system on a stable wall that can bear the weight of the Soundbar main unit.
•Check the strength of the wall. To install the Soundbar system on a wall that may not bear the Soundbar main unit weight, reinforce the wall before installation. If this is not possible, install the system on another wall, one stable enough to bear the weight of the Soundbar main unit.
•Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board,
iron board, wood, etc.). If possible, fix the support screws into wall studs.•Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on.
–Diameter : M5–Length: 1 3/8 inches or longer recommended.•Connect cables from the unit to external devices before you install it on the wall.
•Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.
●If the TV is mounted on the wall, install the Soundbar at least 2 inches (5 cm) below the TV.
2 inches or more2.Mark the location where the screws will go through on the wall, and then remove the installation guide. Next, drill holes for the screws using an appropriately sized drill bit.
Center Line
Center Line
3.Fasten the 2
