04 CONNECTING TO A TV
Hear TV sound from your Soundbar through wired or wireless connections.
•• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control.
––This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable.
––This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.
Connecting using an Optical Cable
When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.)
Rear of the Soundbar
DIGITAL AUDIO IN
(OPTICAL)
OPTICAL OUT | Optical Cable | WIRELESS |
| (not supplied) | |
|
|
D.IN
Bottom of the Soundbar
1.Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable (not supplied).
2.Press the 
button on the bottom panel or on the remote control, and then select the “D.IN” mode.
ENG - 12
