3.Plug in the Wireless Subwoofer, and then check its standby status.
•• Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer blinks. If the LED does not blink, press the ID SET button on the bottom of the Wireless Subwoofer with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the
POWER
Blue
blinking
5 Sec
ID SET
| Bottom of the Wireless Subwoofer | Front of the Wireless Subwoofer |
•• The main unit is heavy. Be careful not to pinch your fingers when pressing the ID SET button or connecting the power cord to the bottom of the unit.
•• The upper part of the subwoofer is prone to scratches. Handle it carefully.
| Do not press on or strike the Speaker |
| Unit on the rear of the body. You can |
Speaker Unit | deform or damage the speaker. |
ENG - 27
