CONNECTING THE SOUNDBAR MAIN UNIT TO THE SUBWOOFER
You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.
Automatic Connection
1.Connect a power supply to the subwoofer.
2.Connect a power supply to the Soundbar, and then press the 
button on the remote control or on the right side of the Soundbar.
3.The subwoofer will be automatically connected to the Soundbar.
4.When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
cIf the red indicator at the rear of the subwoofer is on or the blue indicator flashes continuously, auto pairing cannot occur. If this happens, connect the subwoofer manually, as shown below.
cImportant: Before you begin, put the batteries into the remote. See page 18 for instructions.
LINK
Rear of Subwoofer
Connecting the Subwoofer Manually if the Automatic Connection Fails
cBefore You Begin
•Make sure that the Soundbar and the subwoofer are plugged in.
•Make sure that the Soundbar is turned on.
1.Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. The red indicator on the rear of the subwoofer turns off and the blue indicator blinks.
LINK STANDBY | ID SET |
Rear of Subwoofer
· 5 · English
