2.Turn off the Soundbar.
3.Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off (OFF).
L
EFFECT
| R |
| WOOFE |
| BA |
VOL | SOUND |
4.The ID SET message appears on the display of the Soundbar for a short period of time, and then disappears.
ID SET
Right Side of the Soundbar
5.When the blue indicator on the subwoofer blinks, turn on the power by pressing 
button on the right side of the Soundbar or on the remote control.
6.When the connection is successfully established, the blue indicator on the rear of the subwoofer turn on without blinking.
cIf the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.
· 6 · English
