CONNECTING TO YOUR TV
You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
cImportant: Before you begin, put the batteries into the remote. See page 18 for instructions.
Method 1. Connecting with a Cable
Check the HDMI IN
HDMI OUT
HDMI IN | HDMI Cable |
(ARC) |
Check the HDMI OUT
1.Connect the HDMI cable as shown in the illustration above.
AUX IN
DIGITAL AUDIO IN (OPTICAL)
HDMI OUT
HDMI IN 1
HDMI IN 2
Bottom of
Soundbar
2.TV ARC appears on the display window of the Soundbar main unit and the TV sound is played.
TV ARC
Right Side of the Soundbar
cIf the TV sound is not played, press either 
on the right side of the Soundbar or the SOURCE button on the remote control, and then select D.IN on the display window of Soundbar main unit. The D.IN mode changes to TV ARC and TV sound is output.
cIf TV ARC does not appear on the display window of the Soundbar main unit, check that the cable is connected to the correct port.
cYou can conveniently control the volume of the Soundbar and can set Auto Power Link to ON and have the Soundbar turn on automatically when you turn the TV on.
· 7 · English
