DESCRIPTIONS, Power, Volume, Skip Back, SOUND CONTROL, TREBLE, BASS, REAR LEVEL

DESCRIPTIONS

Power

Volume

Play / Pause Press the p button to pause a file temporarily.

Skip Back If there is more than one file on the device you are playing, and you press the [ button, the previous file is selected.

SOUND CONTROL

Press to select TREBLE, BASS, SUBWOOFER LEVEL, AUDIO SYNC,

REAR SPEAKER, or REAR LEVEL.

Then, use the ,  buttons to adjust the TREBLE or BASS volume from -6 ~ +6, SUBWOOFER LEVEL volume from -12, -6 ~ +6.

Press and hold the SOUND CONTROL button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz, 5KHz and 10KHz are selectable and each can be adjusted to a setting between -6 ~ +6.

If the Soundbar is connected to a digital TV and the video appears out of sync with the audio, press the SOUND CONTROL button to sync the audio with the video. Use the ,  buttons to set the audio delay between 0 ms ~ 300 ms. In USB mode, TV mode and BT mode, the Audio Sync function may not available.

To turn on or off of the rear speaker sound, select REAR SPEAKER in Sound Control, and then adjust the volume between OFF-RS and ON-RS by using the ,  buttons.

●● The REAR SPEAKER and the REAR LEVEL mode are only available when you connect the SWA-8000S (sold separately).

--If the SWA-8000S is disconnected, REAR SPEAKER and REAR LEVEL remain displayed but the functions are not available.

10