![DESCRIPTIONS](/images/backgrounds/8046/804617x1.webp)
DESCRIPTIONS
Remote Control
SOURCE
Press to select a source connected to the Soundbar.Mute
You can turn the volume down to 0 with the push of a button.Press again to restore the sound to the previous volume level.Repeat
Press to set the Repeat function during music playback from a USB device.
OFF - REPEAT : Cancels Repeat Playback.TRACK - REPEAT : Plays a track repeatedly.ALL - REPEAT : Plays all tracks repeatedly.RANDOM - REPEAT : Plays tracks in random order.(A track that has already been played may be played again.)Skip Forward
If there is more than one file on the device you are playing, and you press the ] button, the next file is selected.
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the BluetoothPOWER On function on and off. See pages 23 and 29 for details.SOUND
Surround Sound adds depth and spaciousness to the sound. Pressing the
SOUND button repeatedly cycles through the Surround Sound settings :
ON - SURROUND SOUND, OFF - SURROUND SOUND
Press and hold the button for about 5 seconds to turn the Anynet+ function on or off.
OFF - ANYNET+, ON - ANYNET+
The Anynet+ function lets you control the Soundbar with the remote from an
Anynet+ compatible Samsung TV.The Soundbar must be connected to the TV via an HDMI cable.Press and hold the button for about 5 seconds to turn the Auto Power Link function on or off.
OFF - POWER LINK, ON - POWER LINK
* Auto Power LinkSynchronizes the Soundbar to a connected Optical source via the Optical jack so it turns on automatically when you turn on your TV. (See page 21)
The Auto Power Link function is only available in the D.IN mode.SOUND EFFECT
You can select from 6 sound modes - STANDARD (Original Sound), MUSIC, CLEAR VOICE, SPORTS, MOVIE, and NIGHT - depending on the content you want to listen to.
Select the STANDARD mode if you want to enjoy the original sound.*DRC (Dynamic Range Control)
Lets you apply dynamic range control to Dolby Digital.Press and hold the SOUND EFFECT button for about 5 seconds in STANDBY mode to turn the DRC (Dynamic Range Control) function on or off.
ENG
9