Connecting the Subwoofer, Connecting to the Subwoofer Automatically, CONNECTIONS

CONNECTIONS

CONNECTIONS

●● Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete.

●● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

Connecting the Subwoofer

Connecting to the Subwoofer Automatically

The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly) automatically when the main unit and subwoofer are turned on.

•When the subwoofer is completely connected, the blue LED Link Indicator on the subwoofer stops blinking and glows continuously.

Connecting to the Subwoofer Manually

If the blue LED light does not stop blinking when the main unit and subwoofer are turned on, please set the ID by following the steps below.

●● Important: Before you begin, put the battery into the remote. See page 11 for instructions.

2.Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.

•The STANDBY indicator turns off and the LINK indicator (Blue LED) blinks quickly.

3.While the main unit is powered off (in STANDBY mode), press and hold the (Mute) on the remote control for 5 seconds.

5.To finalize the link, turn the main unit’s power on while the subwoofer’s Blue LED blinks.

•The LINK indicator (Blue LED) on the subwoofer should be glowing continuously and not blinking.

•If the LINK indicator is not solid blue, the linking process has failed. Turn off the main unit and start again from Step 2.

•You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 9)

ENG