CONNECTIONS
CONNECTING TO A TV
●● Important: Before you begin, put the battery into the remote. See page 10 for instructions.
CONNECTING TO A TV USING AN HDMI (DIGITAL) CABLE
HDMI CableHDMI IN | HDMI OUT |
|
1.Connect an HDMI cable from the HDMI OUT
| 2. Press the | button on the top panel of the Soundbar or the SOURCE button on the remote control to select |
the D.IN mode. |
|
●● HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
●● If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
●● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose diameter is less than 0.55 inches.
●● Anynet+ must be turned on.●● This function is not available if the HDMI cable does not support ARC.CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE
Optical Cable (not supplied)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTICAL OUT |
|
|
|
|
|
| OPTICAL IN | |||||||||||
1.Connect the OPTICAL IN (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.
| 2. Press the | button on the top panel of the Soundbar or the SOURCE button on the remote control to select |
the D.IN mode. |
|
20
