TV SOUNDCONNECT, ++Auto Power Link

Samsung Curved

HW-J7500R, HW-J7501R HW-J7500R/ZA

Download 70 pages 38.31 Kb View all pages
Page 21
Page screenshot 21
CONNECTIONS

CONNECTIONS

++Auto Power Link

If you have connected the main unit to a TV with a digital optical cable, you can set the Auto Power function ON to have the Soundbar turn on automatically when you turn the TV on.

AUTO POWER LINKDisplay

ON

OFF - ANYNET+ / ON - POWER LINK

OFF

ON - ANYNET+ / OFF - POWER LINK
1.Connect the Soundbar and a TV with a digital optical cable (not supplied).
2. Press the

button on the main unit’s top panel or the SOURCE button on the remote control to select the

D.IN mode.

 

3.Press the Anynet+ button on the remote control to toggle the Auto Power Link function on and off.

Depending on the connected device, Auto Power Link may not function.

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV SoundConnect function.

Connect1.Turn on the TV and Soundbar.
2. Press the

button on the main unit’s top panel or the SOURCE button on the remote control to select the TV

mode.

 

3.On the TV, a message asking whether to enable the TV SoundConnect function appears.

4.Select <Yes> using the TV's remote control to finish connecting the TV and Soundbar.

If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select Add New Device, and set Add New Device to ON. Then, try again.

Switching the Soundbar’s mode from TV to another mode automatically terminates TV SoundConnect. ●To connect the Soundbar to another TV, the existing connection must be terminated.

To terminate the existing connection, press and hold the p button on the remote for 5 seconds or switch to another mode. To connect to the other TV, follow Steps 1 through 4 above.

ENG

21

Page 21
Page screenshot 21
TV SOUNDCONNECT, ++Auto Power Link - Samsung Curved HW-J7500R/ZA