Troubleshooting, Adjusting the image during recording, Symptom, Symptom, Symptom

• Set Focus to Auto. ¬page 58

• The recording conditions are not suitable for auto focus.

Focus does not adjust automatically.

Adjust the focus manually. ¬page 58

• The lens is dusty on the surface. Clean the lens and check the focus.

• You are recording in a dark place. Increase the brightness.

The image appears too bright or flickering, or

• This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. Cancel

changes in color.

iSCENE to minimize these phenomena. ¬page 52

• Press the [MODE] button to set the video playback mode.

The video does not play back.

• Image files recorded on another camcorder may not play back on your camcorder.

• Check out memory card compatibility. ¬page 31

The Skip or Search function does not work properly.

• If the temperature inside the camcorder is too high, it cannot function properly.

Turn the camcorder off, wait for a few moments, and then turn it on again.

Playback is interrupted unexpectedly.

• Check if the power adaptor or battery is properly connected and stable.

You cannot hear sound when playing back a Time

• The Time Lapse REC function does not record sound.

Lapse recording.

Photos stored on a storage media do not appear in

• Photos recorded on other devices may not appear at their actual size. This is not an error.

the actual size.

• Connect the audio line of the Audio/Video cable jack to your camcorder and the connected device (TV,

You cannot view the image or hear the sound on the

DVD recorder, etc). (Red color- right, White color- left)

connected device.

• The Audio/Video cable jack or micro HDMI cable jack is not connected properly. Make sure that the

Audio/Video cable jack or micro HDMI cable jack is connected to the proper jack. ¬page 81

You cannot dub correctly using the HDMI cable.

• You cannot dub images using the HDMI cable.