Connecting via Bluetooth
Reconnecting or disconnecting the devices
Reconnecting the devices
If the Bluetooth connection ends due to the distance between the devices, bring the devices closer together within a certain period of time. The devices will automatically reconnect.
If the Bluetooth connection ends because of the connected mobile device, access the Bluetooth menu on the mobile device to pair the devices again.
Disconnecting the devices
Press and hold the Multifunction/Talk button for approximately three seconds. Then, the connection ends and the headset enters Bluetooth pairing mode.
You can also end the connection by turning off the headset. When you turn on the headset again and the devices are in range, the headset automatically connects with the most recently paired device.
Noise may occur if the Bluetooth connection is disconnected improperly.
English (USA)
16
14
