Troubleshooting, Adjusting the image during recording, Symptom, Symptom, Symptom

• Set Focus to Auto. page 58

Focus does not adjust automatically.

• The recording conditions are not suitable for auto focus.

Adjust the focus manually. page 58

• The lens is dusty on the surface. Clean the lens and check the focus.

• You are recording in a dark place. Increase the brightness.

The image appears too bright or flickering, or

• This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. Cancel

changes in color.

iSCENE to minimize these phenomena. page 52

• Press the [MODE] button to set the video playback mode.

The video does not play back.

• Image files recorded on another camcorder may not play back on your camcorder.

• Check out memory card compatibility. page 31

The Skip or Search function does not work properly.

• If the temperature inside the camcorder is too high, it cannot function properly.

Turn the camcorder off, wait for a few moments, and then turn it on again.

Playback is interrupted unexpectedly.

• Check if the power adaptor or battery is properly connected and stable.

You cannot hear sound when playing back a Time

• The Time Lapse REC function does not record sound.

Lapse recording.

Photos stored on a storage media do not appear in

• Photos recorded on other devices may not appear at their actual size. This is not an error.

the actual size.

You cannot view the image or hear the sound on the

• Connect the audio line of the Audio/Video cable jack to your camcorder and the connected device (TV,

DVD recorder, etc). (Red color- right, White color- left)

connected device.

• The Audio/Video cable jack or micro HDMI cable jack is not connected properly. Make sure that the

Audio/Video cable jack or micro HDMI cable jack is connected to the proper jack. page 82

You cannot dub correctly using the HDMI cable.

• You cannot dub images using the HDMI cable.