Other settings
Format | Default Set |
Use the Format function if you want to delete all files completely or to correct problems on the storage media.
| 1 Press the [MENU] button |
| [Control (Left/Right)] button |
STBY[220Min]
Insert a memory card. page 30
| 1 Press the [MENU] button |
| [Control (Left/Right)] button |
| Settings [Control (Up/Down)] |
button Format [Control (OK)] |
STBY[220Min]
Settings |
|
Auto Power Off | : |
PC Software | : |
| Settings [Control (Up/ |
Down)] button Default Set |
| [Control (OK)] button. |
| 2 Select Yes if you want all the |
| settings returned to the defaults. |
Settings
Format
Default Set
Language
Exit
| button. |
2 | Select Yes by pressing the |
| [Control(Left/Right)] button, and | |
| then press the [Control (OK)] button. |
Format |
Exit
• Do not turn off the power while using this function.
• After resetting the camcorder, reset the Date/Time Set. page 25
•The Default Set function does not affect the files recorded on the storage media.
• Do not remove the memory card or perform any other operation (such as turning off the power) during formatting. Also, be sure to use the provided power adaptor, as the recording media may be corrupted if the battery becomes exhausted during formatting.
| • If the storage media becomes corrupted, format it again. |
| • Do not format the storage media on a PC or other device. |
| Make sure to format the storage media on this camcorder. |
| • Format the memory card in the following situations: |
| - Before using a new memory card |
| - If the memory card was formatted on other devices |
| - If the memory card was used to record on other devices |
| - If the camcorder cannot read the memory card |
| • A memory card with the protection tab set to lock can not be |
| formatted. |
| • If there is no storage media inserted, it cannot be selected and will |
| be dimmed in the menu. |
80 | • You cannot format when the battery power is insufficient. We |
recommend you use the power adaptor to avoid loss of power while |
formatting.
