Assemble Your Device, Install an Optional Memory Card, Charge the Battery

Samsung Galaxy Tab S 10.5

Wi-Fi SM-T800NZWAXAR SM-T800NTSEXAR SM-T800NTSAXAR

Download 104 pages 18.84 Kb View all pages
Page 9
Page screenshot 9
Assemble Your Device

Assemble Your Device

This section helps you to assemble your device.

Install an Optional Memory Card

You can install an optional microSDor microSDHCmemory card (not included) to add more memory space to your device.

Note: A memory card can be installed at any time; it is not necessary to install it prior to using the device.

1.Open the memory card slot cover and turn to expose the slot.

2.With the gold contacts facing down, carefully slide the memory card into the slot, pushing gently until it clicks into place.

3.Close the memory card slot cover.

Charge the Battery

Your device is powered by a rechargeable, standard Li-Ion battery. A USB charger (charging head and USB cable) is included with the device for charging the battery from any standard outlet.

The battery comes partially charged. You can use the device while charging.

Note: It is recommended you fully charge the battery before using your device for the first time.

Caution: Use only charging devices and batteries approved by Samsung. Samsung accessories are designed for your device to maximize battery life.

Using other accessories may invalidate your warranty and may cause damage.1.Insert the USB cable into the USB charger/ Accessory port.

2.Connect the USB cable to the charging head, and then plug the charging head into a standard outlet.

3.Unplug the charging head from the outlet and remove the USB cable from the device when charging is complete.

Getting Started

4

Assemble Your Device

 

 

 

Page 9
Page screenshot 9
Assemble Your Device, Install an Optional Memory Card - Samsung