RECORDING PHOTOS
You can take photos and store them in the storage media. Set the desired resolution before recording. ¬page 51
PRECHECK!
•Insert a memory card. ¬page 28
•Select the record mode by pressing the MODE button. ¬page 24
1.Select a subject to record.
•Adjust the LCD panel to the best angle for recording.
•Use the Zoom lever or Zoom button to adjust the size of the subject. ¬page 39
2.Frame the subject in the LCD screen, and then
•When the subject is in focus, (z) indicator appears green. If it appears red, readjust the focus.
3.Fully press the PHOTO button.
4.Touch the Quick View (
) icon to view the most recently recorded photo.
•To return to the standby mode, touch the Return ( 
) tab.
9999 
STBY 00:00:00 | [307Min] |
9999 
Do not turn off the camcorder or remove the memory card when taking photos as it may damage the storage media or data.
•The recordable number of photos varies depending on the recording conditions and the photo resolution. ¬page 31
•The camcorder does not record audio when you take photos.
•If focusing is difficult, use the manual focus function. ¬page 57
•For the
•Adjust the brightness of the LCD screen using menu items. Adjusting the brightness does not affect the recorded image. ¬page 77
•For various functions available during recording, see pages 49~65
•Photo files conform to the DCF (Design rule for Camera File system) standard, established by JEITA (Japan Electronics and Information Technology Industries Association).
37
