getting started
INSERTING/EJECTING THE BATTERY
Purchase extra batteries to allow continuous use of your camcorder.
Battery release switch
To insert the battery
To eject the battery
1.Open the battery cover by sliding the OPEN/CLOSE switch toward OPEN.
2.Insert the battery into the battery slot until it locks.
•Make sure that the SAMSUNG logo is facing up and the battery is placed as shown in the figure.
3.Close the battery cover by sliding the OPEN/CLOSE switch toward CLOSE.
1.Open the battery cover by sliding the OPEN/CLOSE switch toward OPEN.
2.Slide the Battery release switch in the direction as shown in the figure.
3.Close the battery cover by sliding the OPEN/CLOSE switch toward CLOSE.
Samsung is not responsible for problems that are caused by using unapproved batteries. If you use | 17 |
batteries from other manufacturers, there is a danger of overheating, fire, or explosion. |
