getting ready to start recording
INSERTING / EJECTING A MEMORY CARD (NOT SUPPLIED)
Terminal portion
To insert a memory card
To eject a memory card
1.Open the memory card cover by sliding the OPEN/CLOSE switch toward OPEN.
2.Insert the memory card into the card slot until it softly clicks.
•Make sure that the camcorder is placed as shown above and the term- inal portion of the card is facing up.
3.Close the memory card cover by sliding the OPEN/CLOSE switch toward CLOSE.
1.Open the memory card cover by sliding the OPEN/CLOSE switch toward OPEN.
2.Gently push the memory card to eject it.
3.Close the memory card cover by sliding the OPEN/CLOSE switch toward CLOSE.
•To avoid data loss, turn off the camcorder by pressing the Power (
) button for one second before inserting or ejecting the memory card.
•Be careful not to push the memory card too hard. The memory card may suddenly pop out.
Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards.
28Card compatibility may vary depending on the manufacturer and the type of memory card.
