Installing DV Media PRO Program

ENGLISH

臺 灣

Installing DV Media PRO Program

You need to install DV Media PRO Program to play back movie files recorded by the DVD Camcorder on your PC.

Turn on your PC. Exit all other running applications.

Insert the provided CD into the CD-ROM drive.

The setup screen appears automatically soon after the CD is inserted. If the setup screen does not appear, click on “Start” on the bottom left corner and select “Run” to display a dialog. Type “D:\autorun.exe” and then press ENTER, if your

CD-ROM drive is mapped to “D:Drive”.

DV Driver is a software driver that is required to support establishing connection to a PC.

(If it is not installed, some functions will not be supported.)

Driver software is installed automatically. Following drivers will be installed:

-USB Removable disk driver (Windows 98 SE only)

-USB PC-CAMERA driver

Windows 98 SE users need to restart Windows.

3.If the <DirectX 9.0> is not installed, it is installed automatically after setting <DV Driver>.

After installing <DirectX 9.0>, please restart your PC.

If <DirectX 9.0> is installed already, there is no need to restart the PC.

<Video Codec> is required to play movie files recorded by this DVD Camcorder on a PC.


要在您的電腦上播放以 DVD 攝錄放影機錄製的影片檔案，您必須 安裝 DV Media PRO Program。


開啟電腦。結束所有正在執行的其他應用程式。 
將隨附的光碟片放入 CD-ROM光碟機。

安裝畫面會在放入光碟片之後立即自動顯示。 如果安裝畫面沒有 顯示，請按下左下方的

「Start」（開始）並選擇「Run」（執行）以顯示對話方塊。 鍵 入 「D:\autorun.exe」然後按下 ENTER （如果）CD-ROM光碟 機對應到「D:Drive」（D：光碟機）。


DV Driver 是與電腦建立連接時所需的一個軟體驅動程式。 （若未安裝，一些功能將不被支援。）

所需的驅動程式軟體將會自動安裝：將安裝以下的驅動程式：

-USB 可卸式磁碟驅動程式（僅限 Windows 98 SE）

-USB PC-CAMERA 驅動程式


Windows 98 SE 使用者需要重新啟動 Windows。


安裝 <DirectX 9.0> 後，請重新啟動 PC。


若已安裝 <DirectX 9.0>，則不需要重新啟動電腦。

您需要配備 <Video Codec> 以在電腦上播放 DVD 攝錄放影機錄 製的影片檔案。