ENGLISH
臺 灣
Digital Still Camera Mode |
| 數位靜態相機模式 | ||
|
|
| ||
Setting the File Number (File No.) |
| 設定檔案編號（File No.） | ||
File Number setting works only in M.Cam Mode. page 26 |
| | 檔案編號設定僅限在 M.Cam Mode下操作。第 26 頁 | |
File Numbers are given to images in the order they were recorded | ||||
| | 將為影像提供檔案編號以便在儲存到記憶卡上時記錄。 | ||
when they are stored on the Memory Card. |
| | 檔案編號可設定如下： | |
File numbers may be set as follows: |
|
| - | <Series>：當存在現有檔案時，新影像將會按下一個數字順序 |
- <Series>: When there are existing files, the new image will be |
|
|
| 命名。 |
named as the next number in the sequence. |
|
| - | <Reset>：當記憶卡中沒有已儲存的檔案時，檔案的編號將從 |
- <Reset>: When there are no files stored on the Memory Card, |
|
|
| 0001 開始。 |
the file numbering starts from 0001. |
|
|
|
|
1. Set the [Mode] switch to [CARD].
2. Set the [Power] switch to [ | (Camera)]. |
3.Press the [MENU] button.
The menu list will appear.
4.Move the [Joystick] up or down to select <Memory>, then press the [Joystick(OK)].
5.Move the [Joystick] up or down to select <File No.>, then press the [Joystick(OK)].
6.Move the [Joystick] up or down to select the desired option (Series or Reset), then press the [Joystick(OK)].
The selected option is applied.
7.To exit, press the [MENU] button.
4 |
|
M.Cam Mode |
|
►Memory |
|
Photo Quality | ►Super Fine |
File No. | ►Series |
Move OK Select MENU Exit
6 |
|
M.Cam Mode |
|
►Memory |
|
Photo Quality |
|
File No. | Series |
| Reset |
Move OK Select MENU Exit
1.設定 [Mode] 開關為 [CARD]。
2. 設定 [Power] 開關為 [ (Camera)]。
3.按下 [MENU] 按鈕。
選單清單將會顯示。
4.向上或向下移動 [Joystick] 以選擇
<Memory>，然後按 [Joystick(OK)]。
5.向上或向下移動 [Joystick] 以選擇
<File No.>，然後按 [Joystick(OK)]。
6.向上或向下移動 [Joystick] 以選擇想要 的選項（Series 或 Reset），然後按下
[Joystick(OK)]。
所選的選項將會套用。
7.若要退出請按 [MENU] 按鈕。
93
