DVD 攝錄放影機：基本錄製, Making your First Recording

ENGLISH

臺 灣

3.Open the LCD Screen.

 Set the [Mode] switch to [DISC].

 Set the [Power] switch to

4.To start recording, press the [Start/Stop] button.

 <REC> is displayed on the LCD Screen. The record mode, recording time, the disc type, the format mode, and the title scene number are displayed on the LCD Screen.

5.To stop recording, press the [Start/Stop] button again.

<STBY> is displayed on the LCD screen after blinking.

If you press the [Start/Stop] button to record again, a new title scene will be created.

The title scene number will not appear in the STBY mode but in the REC mode.

REC  SP 0:00:20 -RW30 min VR

001

2. 取下透鏡蓋。

3.打開 LCD 螢幕。

 <REC> 會顯示於 LCD 螢幕 上。錄製模式、錄製時間、光碟 類型、格式化模式和標題編號會 顯示在 LCD 螢幕上。

5.若要停止錄製，請再次按 [Start/Stop] 按鈕。

 <STBY> 閃爍後顯示於 LCD 螢幕上。

 如果按下 [Start/Stop] 按鈕再次開始錄製，新的 標題清單將被建立。

標題清單號不會顯示在待機模式，而會顯示在錄 製模式下。

Notes

Playing title scenes. page 63

Up to 253 title scenes can be created on DVD-R/+RW/+R DL/-RW(Video Mode)discs, and up to 999 on DVD-RW(VR Mode).

Detach the Battery Pack when you have finished recording to prevent unnecessary battery power consumption.

If the power cable/batteries are disconnected, or recording is disabled during recording, an error message will appear and the system is switched to the data recovery mode. While data is being recovered, no other function is enabled. After data recovery, the system will be switched to the STBY mode.

附註

播放標題場景。 
第 63 頁

可在 DVD-R/+RW/+R DL/-RW(Video Mode) 光碟中建立多達 253 個標 題場景，而 DVD-RW(VR Mode) 則多達 999 個。


在您完成錄製時取出電池組，以避免不必要的電池耗電。

 如果拔下電源線或電池，或者錄製時中途取消，一則錯誤訊息會顯示 並且系統會切換為資料還原模式。資料還原進行時，無法使用其他功 能。 資料還原後，系統會切換至待機模式。