Basic DVD camcorder operation | DVD 摄像机的基本操作 | |
|
|
|
Turning the DVD camcorder on and off
You can turn the camcorder on or off by sliding the POWER switch down.Selecting the operating modes
•Set the operation mode by adjusting the Storage mode switch
| 打开和关闭 DVD 摄像机 |
���� | 向下滑动 POWER 电源开关可打开或关闭摄像机。 |
| 选择操作模式 |
| • 在录制或进行一些操作之前，通过调整存储模 |
| 式和 MODE 按钮设置操作模式 |
| ( 仅限 |
-Digital camera mode: To record movie or photo images on memory card. pages 56~57
2.Press the MODE button to set Record(
) or Play(
) mode. Each press of the MODE button toggles between the Record( ) mode and Play(
) mode.
When the DVD camcorder is turned on, the self- diagnosis function operates and a message may appear. In this case, refer to warning indicators and messages (on pages 103~105) and take corrective action.
STBY 0:00:00 [30 min]
<DVD camcorder record mode>
12/12 |
) 或播放( 
) 模式。每按下一次 MODE 按钮，就会在 录制模式 ( 
) 和播放模式 ( 
) 之间进行切换。打开 DVD 摄像机后，开始自我诊断功能并且可能会 显示提示信息。在这种情况下，请参照警告图标和提 示信息 ( 第 103~105 页 )，并采取相应的措施。
When using this camcorder first time
•When you use your DVD camcorder for the fi rst time or you reset it, you will see the “Date/Time Set” screen for the startup display. If you do not set the date and time, the “Date/Time Set” screen appears every time you turn on your camcorder.
STBY | 0:00:00 [30 min] | ||
Date/Time Set |
| ||
Month Day | Year | Hour | Min |
JAN / 01 | / 2008 | 12 : | 00 AM Ok |
Cancel
•第一次使用 DVD 摄像机时或者恢复默认设置之后，将在 启动屏幕看到 “Date/Time Set”( 时钟设置 )。如果不设 置日期和时间，则每次打开摄像机都会显示 “Date/Time Set”( 时钟设置 ) 屏幕。
21_ English | 中文 _21 |
