连接到电脑, connecting to a PC (SC-DX103/DX105only), SYSTEM REQUIREMENTS

connecting to a PC (SC-DX103/DX105 only)

This chapter explains how to connect the camcorder to a PC using the USB cable for various functions.

✪When connecting a USB cable to a PC, refer to the software installation instructions and PC speciﬁcations below.

SYSTEM REQUIREMENTS

DV Media PRO

Following requirements must be satisﬁed to use DV Media PRO.

		Windows Vista(32bit,64bit), XP, or 2000
	OS	*Standard installation is recommended.
	OS	Operation may not be assured if the above OS has
		Operation may not be assured if the above OS has
		been upgrade.

	CPU	Intel® Pentium® 4, 2 GHz recommended

	RAM	512 MB (2 GB and above recommended)

	Connector	USB1.1/2.0 connector

	Display	1024 x 768, 24-bit colour or higher

	Miscellaneous	Internet Explorer 5.5 or later
	Miscellaneous	DirectX 9.0 or later
		DirectX 9.0 or later

•USB port must be provided as standard USB 2.0 or USB 1.1. Hi-speed USB (USB 2.0) is recommended.

•USB interface is not supported on Macintosh operating systems.

•The above system requirements information is not a guarantee that the provided software will work on all personal computers meeting those requirements.

•On a slower PC than recommended, movie playback may not be smooth or video editing may take a long time.

•On a slower PC than recommended, movie playback may skip frames or operate unexpectedly.

•Intel® Pentium III™ or Pentium 4™ is a trademark of the Intel Corporation.•Windows® is a registered trademark of the Microsoft® Corporation.•All other brands and names are property of their respective owners.