Connecting a Power Source, Using a Household Power Source

ENGLISH

臺 灣

Connecting a Power Source

There are two types of power source that can be connected to your DVD Camcorder.

-The AC Power adapter: used for indoor recording.

-The Battery Pack: used for outdoor recording.

Using a Household Power Source

1. Connect the AC Power adapter (AA-E9 TYPE) to a wall socket.

The plug and wall socket type may differ according to your resident country.

2.Open the LCD Screen and Jack Cover.

3.Connect the DC cable to the DC IN jack of the DVD Camcorder.

4.Set the DVD Camcorder to each mode by holding down the Green Tab on the [Power] switch and turning it to [On] or [Off].


有兩種電源類型可以連接 DVD 攝錄放影機。

-交流電源適配器：用於室內拍攝。

-電池組：用於戶外拍攝。

使用家中電源為 DVD 攝錄放影 機供電，就不必常常擔心電池電 量的多寡。您可以讓電池組留在 設備中，電池電量將不會消

耗掉。

1. 將交流電源適配器（AA-E9型）連接到牆上插座。

牆上插座和插頭類型會因不 同的國家而異。

2. 開啟 LCD 螢幕和插孔蓋。

3. 將直流電纜線連接到 DVD 攝錄放影機的直流電

插孔。

4.按住 [Power] 開關的綠色標籤，並轉動為 [On] 或 [Off] 可將 DVD 攝錄放影機設定為各種模式。