–Keep Wi-Fi on during sleep: Specify when to switch from Wi-Fi to mobile data for data communications when the device goes to sleep (when the backlight goes out).
–Always allow scanning: Allow Google location service and other apps to scan for networks, even when Wi-Fi is turned off.
–Wi-Fi timer: Set the start and end time to connect to or disconnect from Wi-Fi networks.
–Install certificates: Install certificates from a memory card.
–MAC address: View your device’s MAC address (not configurable).
–IP address: View your device’s IP address (not configurable).
•WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or other equipment.
•WPN PIN entry: View the PIN used by your device to set up a PIN-secured connection to a Wi-Fi router or other equipment (not configurable).
•Help: Learn about setting up and using Wi-Fi networks.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly via Wi-Fi, without a Wi-Fi network or hotspot, and without having to set up the connection.
Important! All devices must be Wi-Fi Direct-enabled.
Turn Wi-Fi Direct On
1.From a Home screen, touch 
➔ 
Settings ➔ Connections tab ➔ Wi-Fi.
2.Touch the OFF/ON button to turn Wi-Fi ON 
. (Wi-Fi must be enabled to use Wi-Fi Direct.)
3.Touch Wi-Fi Direct to turn Wi-Fi Direct on.
Turn Wi-Fi Direct Off
1.From a Home screen, touch 
➔ 
Settings ➔ Connections tab ➔ Wi-Fi.
2.Touch Wi-Fi Direct to view connections.
3.Touch End connection to turn Wi-Fi Direct off and terminate all Wi-Fi Direct connections
Note: Turning Wi-Fi off also turns off Wi-Fi Direct and terminates all Wi-Fi Direct connections
Connections 58
