Reconnect to a Bluetooth Device
1.From a Home screen, touch 
➔ 
Settings ➔ Connections tab ➔ Bluetooth.
2.Touch the OFF/ON button to turn Bluetooth ON 
.
3.Make sure that the target device is discoverable.
4.Touch the target device's name in the Bluetooth devices section.
5.If prompted to enter a passcode, try 0000 or 1234, or consult the target device's documentation.
Disconnect or Unpair from a
Bluetooth Device
Disconnect from a Bluetooth Device
You can disconnect your device from a Bluetooth device, such as a headset. Disconnecting does not unpair the Bluetooth device— the next time you connect, your device and the target device will recognize each other and exchange information without having to enter a passcode or PIN.
1.From a Home screen, touch 
➔ 
Settings ➔ Connections tab ➔ Bluetooth.
2.Touch the OFF/ON button to turn Bluetooth ON 
.
3.Touch the connected device, and then touch OK to disconnect.
Unpair from a Bluetooth Device
You can make your device forget its pairing connection with another Bluetooth device. To connect to the other device again, you may need to enter or confirm a passcode again.
1.From a Home screen, touch 
➔ 
Settings ➔ Connections tab ➔ Bluetooth.
2.Touch the OFF/ON button to turn Bluetooth ON 
.
3.Under Paired devices, touch 
next to the device, and then tap Unpair.
Bluetooth Settings
When Bluetooth is on, additional settings are available.
1.From a Home screen, touch 
➔ 
Settings ➔ Connections tab ➔ Bluetooth.
2.Touch the OFF/ON button to turn Bluetooth ON 
.
3.Touch your device's name to enable or disable visibility to other Bluetooth devices. When your device is visible, other devices can find your device during a scan. Your device remains visible for the period of time set in the Visibility timeout setting.
61
