Troubleshooting
Recording
| Symptom |
| Explanation/Solution |
| During recording, the date/time does not |
| • Date/Time Display is set to Off. Set the Date/Time Display to On. page 103 |
| ||
| display. |
| |
|
| |
|
|
|
|
| • Set your camcorder to the photo recording mode. page 41 |
| You cannot record a photo image. |
| • Release the lock on the |
| • The storage media is full. Use a new memory card or format the storage media. | |
|
| |
|
| page 107 Or remove unnecessary images. page 65 |
|
|
|
| You don’t hear the shutter sound when you |
| • Set Shutter Sound to On. |
| • When the micro HDMI cable or Audio/Video cable is connected to the camcorder, the | |
| record a photo image. |
| |
| Shutter Sound is disabled temporarily. | |
|
| |
|
|
|
|
| • Set Beep Sound to On. |
| You don’t hear the beep sound. |
| • The Beep sound is turned off temporarily when you record videos. |
| • When the micro HDMI cable or Audio/Video cable is connected to the camcorder, the Beep | |
|
| |
|
| Sound is disabled temporarily. |
|
|
|
| There is a time difference between the point |
| • On your camcorder, there may be a slight time delay between the point where you press the |
| where you press the [Recording start/stop] |
| |
| [Recording start/stop] button and the actual point where the recorded video starts/stops. | |
button and the point where the recorded video |
| |
| This is not an error. | |
| starts/stops. |
| |
|
| |
|
|
|
| Horizontal stripes appear on the images. |
| • This can occur when recording images under a fluorescent lamp, sodium lamp, or mercury |
| lamp. This is not a malfunction. | |
|
| |
|
|
|
Appendixes 116
