Connecting to a WLAN and configuring network settings, 5 Touch the     tab

Configuring the network settings

5 Touch the     tab.

You can configure network settings manually. Note that configuring

• The camcorder connects to the network via the selected AP.

these settings manually are not necessary in most cases. If your

• Even if AP authentication and Data Encryption have been detected,

camcorder connected to the network after you followed the directions

set the authentication mode to Open or Shared.

on page 72, your camcorder has adjusted these settings and you do

• If the camcorder does not detect the AP automatically, you can set

not need to configure them manually.

the network properties directly. page 74

1 Press the [Home ( 

 )] button  touch Social Sharing.

• Data encryption settings by authentication type are below:

- Open  Disabled or WEP

2 Touch the MENU ( 

 ) tab  Wi-Fi Setting.

- Shared  WEP

- WPA-PSK  TKIP, AES, or TKIP/AES Mixed

• The camcorder automatically searches for available AP devices.

- WPA2-PSK  TKIP, AES, or TKIP/AES Mixed

3 Touch the     tab next to an AP.

• When the Data Encryption function is set to WEP or TKIP for

802.11n AP connection, you can access in the 802.11g mode.

In the 802.11g mode, the network connection and speed are not

Wi-Fi Setting

guaranteed.

Item

Description

Authentication

Select an authentication type according to your AP’s setting.

When you select Open or Shared, WPA is automatically set.

Data Encryption

Select an encryption type according to your AP’s setting.

Network

Enter the password using the virtual keyboard. page 75

Password

IP Setting

The default is Auto. You can select Manual to set the IP

address manually.

Wireless network 73