![Connecting to a TV](/images/backgrounds/7709/7709179x1.webp)
Connecting to a TV
Connecting to a regular TV
You can view images recorded with your camcorder on a regular TV that supports standard definition. This camcorder supports the composite output for standard definition video transfer.
1 Connect the camcorder to a TV with an Audio/Video cable.
2 Set the TV’s input or source selector to the input you’ve attached the camcorder to.
•Refer to the TV’s instruction manual to see how to select the TV input.
Connecting an Audio/Video cable for the composite output | 3 Select the playback mode on your camcorder, and then |
start to play back videos or photos. pages 56~62 |
Regular TV
Signal flow
Audio/Video cable
Stereo Type
VIDEO AUDIO
LR
Yellow Red
White
Camcorder
Mono Type
VIDEO AUDIO
YellowWhite
Using with other devices 86
•Make sure you’ve connected the camcorder to the correct input jacks. The TV screen may not display the right video information if connected incorrectly.
•When connecting to a TV using the Audio/Video cable, match the color of the cables to the color of the corresponding jacks.
•Video input may appear green depending on the TV. If this occurs, connect the yellow plug of the Audio/Video cable to the green jack of the TV.
•When the camcorder is connected to a TV with more than one kind of cable, the camcorder outputs video signals in the following order of priority:
- HDMI Audio/Video (composite) output
•This camcorder is provided with the TV Connect Guide menu function. If you try to connect the camcorder to a TV and don’t have your user’s manual, you can use the TV Connect Guide menu function to view connection instructions on the camcorder’s screen. page 104
•If your TV has one audio jack (mono input), connect the yellow plug of the Audio/Video cable to the video jack, the white plug to the audio jack, and leave the red plug unconnected.
•When you connect the camcorder to a TV using the Audio/Video cable, images recorded in