Inserting/Ejecting the battery and memory card
Inserting/ejecting the battery
Battery release switch
To insert the battery
1 Slide, and then open the battery slot cover as shown in the figure.
2 Insert the battery into the battery slot until it locks.
•Make sure that the SAMSUNG logo is facing down and the battery is placed as shown in the figure.
3 Close the battery slot cover.
To eject the battery
1 Slide, and then open the battery slot cover as shown in the figure.
2 Slide the Battery release switch in the direction shown in the figure, and then pull out the battery.
3 Close the battery slot cover.
•Samsung is not responsible for problems that are caused by using unapproved batteries. If you use batteries from other manufacturers, there is a danger of overheating, fire, or explosion.
•Purchase extra batteries to allow continuous use of your camcorder.
Getting Started 15
