About the battery

About the battery

A lithium-ion battery is small-sized and has a high capacity. Low ambient temperature (below 50ºF (10ºC)) may shorten its usage time and affect its function. Before recording in low temperatures, put the battery into your pocket to warm it, then install it in the camcorder.

-A small amount of battery power is consumed when the battery is stored in the camcorder even if the camcorder power is off.

-The battery may be completely discharged, if it has been installed and left in the camcorder for a long period of time. If this occurs, the battery may not fully operate even if you charge it.

-If the battery is not used for a long time, fully charge the battery and then, using your camcorder, drain the charge completely once every 3 months to keep the battery functioning properly. To store the battery, remove it from your camcorder and put it in a cool, dry place.

•Charge an extra battery before using the camcorder outdoors in cold temperatures.

•Check whether the battery terminal is damaged if the battery falls or is dropped.

-If you install a battery with the damaged terminal into the camcorder, you can damage the camcorder.

•Remove the battery and the memory card from the camcorder and disconnect the power adaptor after use.

-Store the battery in a stable, cool and dry place. (Recommended temperature : 59ºF~77ºF (15ºC~25ºC), recommended humidity: 40%~60%)

-The battery terminals can become rusty or malfunction if the battery is stored in a smoky or dusty location.

-Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace the battery with a new one.

-Each battery’s life is affected by storage, operating, and environmental conditions.