Settings menu
Shooting
| Item | Description |
): Records in the Full HD (1920x1080/60i) format.•HD 720/60p ( 
): Records in the HD (1280x720/60p) format.•Web/HD ( 
): Records in the Web/HD format.
| Use for videos you intend to upload to Web sites. | |
| • 60i indicates the camcorder will record in interlaced | |
| Video | scan mode at 60 fields per second. | |
• 60p indicates the camcorder will record in progressive | ||
| Resolution | ||
| scan mode at 60 frames per second. |
•Recorded files are encoded using Variable Bit Rate (VBR). VBR is an encoding system that automatically adjusts the bit rate in response to the image being recorded.
•The available video recording time differs according to the video resolution you select. page 19
•The videos recorded in Web/HD resolution are displayed in 1280X720/60p resolution in the video thumbnail view and in WQGA (432x240/30p) resolution in the Social Sharing mode. page 79
| Set the photo resolution. | ||
| • | 5.3M 3072X1728* ( | ): Records in the |
|
| 3072x1728 resolution. | |
| Photo | • | 2M 1920X1080 ( | ): Records in the 1920x1080 |
| resolution. |
| |
| Resolution |
|
| |
| • The number of recordable images differs according to | ||
|
| ||
|
| the photo resolution you select. page 19 | |
•Photos that are recorded on your camcorder may not playback properly on other digital devices that do not support these photo sizes.
Settings
|
|
| * : Default |
| Item | Description | ||
| Set to compensate for camcorder shake/blur. | ||
| • Off*: Disables the function. | ||
| • | On ( | ): Enables to compensate for camcorder shake. |
| OIS Duo | • | Plus ( | ): Enables the function. |
| OIS Plus improves on existing Optical Image Stabilization | ||
|
| ||
|
| by allowing the camcorder lens to shift over a wider range | |
|
| of motion in wide/tele zoom position. This allows the | |
|
| camcorder to compensate for greater degrees of camcorder | |
|
| shake and delivers a stunning level of image smoothness. | |
): Focuses on a small portion of a large object at a tele angle.
| • When recording in the Tele Macro mode, the focus | |
| speed may be lowered. | |
| • Use a tripod (not supplied) to prevent camcorder | |
| shake in the Tele Macro mode. | |
| Tele Macro | • Avoid shadows when recording in the Tele Macro mode. | |
• As the distance to the subject decreases, focusing | ||
| ||
| area narrows. |
•When the distance between the camcorder and a subject is too small and the camcorder cannot focus, press the [Zoom (W)] button and then adjust the focal distance between the camcorder and the subject.
•When the Tele Macro function is On and the camcorder magnifies a subject in tele mode, the minimum focal distance between the camcorder and a subject is 50cm.
98
