system setting
Quick On STBY
When you are going to record frequently for an extended time, use the Quick On STBY function to reduce energy consumption and battery drain. With the Quick On STBY function on and the camcorder In standby mode, closing the LCD screen starts Quick On STBY. Once you are ready to record again and you open the LCD screen, Quick On STBY brings the camcorder out of the power saving mode quickly.
) Setting (
) tab “Quick On STBY.”2.Touch a desired submenu item.3.To exit the menu, touch the Exit (
) or Return (
) tab•In the standby mode, closing the LCD screen starts the Quick On STBY mode shortly. The camcorder stays in Quick ON STBy mode for the time you select, and then turns off.
| 85 |
| MIN |
| Shutter Sound |
| Booting Mode |
4 / 7 | Auto Power Off |
| Quick On STBY |
•5 Min : In the standby mode, closing the LCD screen starts the Quick On STBY mode in a few seconds. The camcorder stays in Quick On STBY mode for 5 minutes and then turns off.
•10 Min : In the standby mode, closing the LCD screen starts the Quick On STBY mode in a few seconds. The camcorder stays in Quick On STBY mode for 10 minutes and then turns off.
•20 Min : In the standby mode, closing the LCD screen starts the Quick On STBY mode in a few seconds. The camcorder stays in Quick On STBY mode for 20 minutes and then turns off.
• Turning off the camcorder after use is always recommended to reduce the energy consumption, however, you can effectively use the Quick On STBY function for frequent shooting conditions to reduce energy consumption and decrease battery drain.
•In the Quick On STBY mode, “Auto Power Off: 5 Min” setting is disabled.
•The mode indicator keeps blinking in the Quick On STBY mode.
•The Quick On STBY mode is not available under the following conditions:
-When the LCD screen is open.
-When a video cable (HDMI, Component/AV) or the USB cable is connected to the camcorder.
-When you operate the buttons on the camcorder.
96
