WARNING INDICATORS AND MESSAGES

USB

Message	Icon	Informs that...	Action

Fail Printer		A problem occured when	• Check the USB cable.
Connecting		A problem occured when	• Try the connection procedure again.
Connecting	-	connecting the camcorder	• Try the connection procedure again.
Change 'USB	-	connecting the camcorder	• Switch “USB connect” function to
Change 'USB		via USB to a printer.	• Switch “USB connect” function to
Connect'		via USB to a printer.	“PictBridge.”
Connect'			“PictBridge.”

Fail USB Connecting		A problem occured when	• Check the USB cable.
Fail USB Connecting		A problem occured when	• Try the connection procedure again.
Change 'USB	-	connecting the camcorder	• Try the connection procedure again.
Change 'USB	-	connecting the camcorder	• Switch “USB connect” function to “Mass
Connect'		via USB to a PC.	• Switch “USB connect” function to “Mass
Connect'		via USB to a PC.	Storage.”
			Storage.”

Ink Error	-	There is a problem with the	• Check the ink cartridge.
Ink Error	-	ink cartridge.	• Put a new ink cartridge in the printer.
		ink cartridge.	• Put a new ink cartridge in the printer.
Paper Error	-	There is a problem with the	• Check the paper in the printer. If there is no
Paper Error	-	paper.	paper, insert paper.
		paper.	paper, insert paper.

			• Your camcorder does not support this ﬁle
File Error	-	There is a problem with the	format.
File Error	-	ﬁle.	• Try another ﬁle recorded on your
		ﬁle.	• Try another ﬁle recorded on your
			camcorder.

		There is a problem with the	• Turn the printer’s power off and on.
Printer Error	-	There is a problem with the	• Contact the printer manufacturer’s service
Printer Error	-	printer.	• Contact the printer manufacturer’s service
		printer.	center.
			center.

Print Error	-	A problem occured during	• Do not remove power source or eject
Print Error	-	printing.	memory card during printing.
		printing.	memory card during printing.

When there is dew condensation, put the camcorder aside for an hour or two before using it

• What is dew condensation?

Dew condensation occurs when you move a camcorder between locations that have signiﬁcant temperature difference. The dew condenses on the external or internal parts of the camcorder, and on the reﬂection lens. When this happens, it may cause the camcorder to malfunction or damage the camcorder when you turn the power on.

•Exactly when does the dew condensation occur?

When you move the camera to a location with a higher temperature than the previous location, or when you move it to a hot area suddenly. Examples:

-You record outside in cold weather during -- the winter and then move the camera in indoors.

-You record outside in hot weather after being indoors or inside a car where the A/C was running.

•What can you do?

Turn the power off, detach the battery pack, and leave the camcorder in a dry area for 1 to 2 hours before using it.

133