Magic Touch
Simply touch the area on the LCD screen that you want to focus on when taking a photo.
PRECHECK!
Select the Photo ( 
) mode by pressing the MODE button. page 49
) tab “Magic touch.”2.Touch a desired submenu item.3.To exit the menu, touch the Exit (
) or Return (
) tab.Submenu items
•Off: Disable the function.•On (
): Simply touch the subject displayed on the LCD screen that you would like the camcorder to focus on. The camcorder also adjusts brightness to the optimal value.
|
| 85 |
|
| MIN |
| Focus | AUTO |
| Face Detection |
|
4 / 7 | Magic Touch |
|
| Metering |
|
| 3888 | 85 |
| MIN |
Tip
Using Magic TouchUsing the Magic Touch function, you can focus on a small section of a picture.
You can also activate Magic Touch by pressing the same point on the LCD screen for about 2 seconds.
To take a picture when the Magic Touch function is on, press the PHOTO button or simply touch the subject shown on the LCD screen, and then hold for about 2 seconds.
When the Magic Touch function is on, you can touch the AF (
) tab on the LCD screen to
3888 | 85 |
MIN |
•You cannot use the following settings with the “Magic Touch” function:
“Back Light,” “Face Detection,” “Focus: Manual,” “Digital Zoom” or “Metering.”
•Even if the you enabled “Cont.Shot,” you cannot initiate continuous shooting by touching the LCD screen.
75
