basic operation of the camcorder
Checking the remaining battery and recording capacity
/
CHECK) button.•When the power is on, press and hold the display ( 
/
CHECK) button for about 3 second.
•The remaining battery time and the available recording time appear for about 10 seconds according to the storage and quality setting values.
Remaining battery (approx.) | ||
Battery |
|
|
0% | 50% | 100% |
85 Min |
|
|
Card (HD 1080/60i F) |
|
|
80 Min |
|
|
Available recording time (approx.)
Remaining battery (approx.)
• Battery information is available only when the battery pack is inserted in your camcorder.
•If you are using the AC Power adaptor to power the camcorder, and you do not have the battery inserted, the “No Battery” message appears.
USING THE TOUCH PANEL
The touch panel allows you to enjoy playback and recording with a simple touch of your finger. Place your hand on the rear side of the LCD screen to support it.
Then, touch the items displayed on the screen.Q. MENU
STBY 00:00:00 [80Min] | 85 |
MIN |
MODE
•Do not place a protective film on the LCD screen.
•If a film is applied for a long while, strong cohesion on the surface of the screen may cause a malfunction of the touch panel.
• Be careful not to accidentally press the buttons near the LCD panel while using the touch panel.
• If a film is attached for a long time, strong adhesion between the film and the surface of the screen
32may cause a malfunction of the touch panel.
