Troubleshooting, ENGLISH

Symptom

Explanation/Solution

Auto focus does not work.

 Check the Manual Focus menu.



Auto focus does not work in the Manual Focus mode.

When the power is turned off and then



If the DC Adapter is connected, remove the cord, turn on the Power switch,

turned on, a blue screen appears instead of

and then connect it again. If the battery is connected, disconnect it, turn

the normal screen.

the Power switch to on, and then connect it again.



Check the [Power] switch is set to [

(Camera)].

Pressing the [Record Start/Stop] button

 There is not enough free space in the disc. Replace the disc with a new

one or format the disc.

does not start recording.



Disc was finalized.

Make sure the disc is writable to record additional pictures.

 DVD Camcorder is too hot. Turn off the power and cool it down a while.

Disc is not recognized and the disc cover



The disc is a damaged one. Replace with a new disc.

opens.



Check the [Power] switch is set to [

(Player)].

Pressing the [Joystick] does not start

 Check the disc compatibility.



Make sure the disc was inserted with its writable side facing the

playing.

DVD Camcorder.

 A disc with data that had been recorded using other devices may not

properly work with this DVD Camcorder.

 Do not store the DVD Camcorder in a place subject to strong magnetism.

The LCD is turned off.

 Keep away from magnetic materials.

When magnetic material is near the left side of the DVD Camcorder, the

LCD may be turned off but it is not a malfunction.