Formatting the Memory Card (Format)

If you execute the Format function, all images will be erased completely and erased images cannot be recovered.

1.Set the [Mode] switch to [CARD].

2.Set the [Power] switch to [(Player)].

The thumbnail index of photo images appears. If there are no recorded images on the Memory Card, <No file!> is displayed.

3.Press the [MENU] button.

The menu list will appear.

4.Move the [Joystick] up or down to select <Memory>, then press the [Joystick].

5.Move the [Joystick] up or down to select <Format>, then press the [Joystick].

6.Move the [Joystick] to the left or right to select <Yes>, then press the [Joystick].

The <Complete!> message will appear when the formatting is completed.

You can directly access the Format function by using the [Q.MENU]. page 27

If you execute the Format function, all photo/moving images will be erased completely. Erased photo/moving images cannot be recovered.

Formatting the Memory Card using a different device will cause Memory Card read errors.

Do not turn the power off in the middle of the formatting.

A Memory Card with the protection tab set to save will not be formatted. page 89

Do not format the Memory Card on a PC. Not formatted! message may appear if a Memory Card formatted on a PC is inserted.

4

5

6

Move OK Select MENU Exit

M.Player Mode

►Memory

Delete

Delete All

Protect

Print Mark

Format

Move OK Select MENU Exit

Photo

100-0001[1/10]

Format?

All files will be deleted!

Yes No