ENGLISH
Preparation
Battery Level Display
The battery level display indicates the amount of power remaining in the Battery Pack. |
|
| ||
a. | Fully charged |
|
|
|
b. | 20~40% used |
|
|
|
c. | 40~80% used |
|
|
|
d. | 80~95% used (red) |
|
|
|
e. | Completely used (Blinking) |
|
|
|
| (The DVD Camcorder will turn off soon, change the battery as soon as possible.) |
|
| |
The Finalize/Format functions are not available when the battery level is between | and | . | ||
| At battery level ‘e’ |
|
|
|
| The battery becomes low in capacity and the < | > indicator blinks on the display. |
|
|
| The screen will turn blue when the battery is almost completely discharged. |
|
| |
Battery Pack Management
The Battery Pack should be recharged in an environment between 32 °F (0 °C) and 104 °F (40 °C).
The Battery Pack should never be charged in a room with a temperature that is below 32 °F (0 °C).
The life and capacity of the Battery Pack will be reduced if it is used in temperatures below 32 °F (0 °C) or left in temperatures above 104 °F (40 °C) for a long period of time, even when it is fully recharged.
Do not put the Battery Pack near any heat source (i.e. fire or a heater).
Do not disassemble, apply pressure to, or heat the Battery Pack.
Do not allow the + and – terminals of the Battery Pack to be
23
