ENGLISH
DVD Camcorder: Connection
Using the Voice Plus
The Voice Plus function works only in Player mode. page 26
This function enables you to narrate over a
When dubbing a DVD to other AV devices (DVD Recorder, VCR), the Voice Plus feature dubs your voice from the internal microphone of the DVD Camcorder, instead of copying the existing audio on the DVD.
TV
DVD Recorder/VCR
Signal flow
1.Connect the DVD Camcorder to your AV device with AV cable. page 86
2.Set the [Mode] switch to [DISC].
3.Set the [Power] switch to [ (Player)].
4.Insert the disc you wish to play back in this DVD Camcorder.
5.Press the [Record Start/Stop] button on a point where you want to start the Voice Plus feature during playback.
Voice Plus icon ( ) is displayed and <Voice Plus> will blink for a while.
Sound signals incoming from the internal microphone will be dubbed to a connected AV device, instead of copying the
6.To cancel, press the [Record Start/Stop] button again.
AV Cable
5
DVD Camcorder
SP 0:00:20
|
|
| SP 0:00:20 | |
Notes |
| |||
| 30 min | VR | ||
| Voice Plus is available only when the AV cable is connected. If a USB cable |
| 001 | |
| DC175/DC575 only) is connected, the Voice Plus function may not operate properly. |
|
| |
| If you perform Stop, Play/Still, REW, or FF while the Voice Plus function is being executed, | Voice Plus |
| |
| the Voice Plus function will be deactivated. |
|
|
When the Voice Plus function is in progress, the [MENU] button or [PHOTO] button does not work.
The Voice Plus function does not affect the original sound on the recorded disc.
Sound is transferred from the internal microphone on this DVD Camcorder to the connected
AV device, when using the Voice Plus function. Make sure the microphone is not covered or blocked in any way.
Adjust the sound volume on the connected external device. (TV, audio system etc.)
Feedback may occur if the DVD Camcorder is placed near the speaker of an external device.
Turn down the volume of the external device and keep the DVD Camcorder a reasonable distance away.
87