![ENGLISH](/images/backgrounds/7794/7794187x1.webp)
ENGLISH
Digital Still Camera Mode (SC-DC173(U)/DC175/DC575 only)
Taking a Photo Image (JPEG) on a Memory Card
You may take photo images while in M.Cam Mode and store the images on the Memory Card. page 26
You can take photo images using the remote control.
Audio will not be recorded with a photo image on to the Memory Card.
Please check the protection tab setting on your memory card before recording. You may not be able to record when it is set to lock.
1. Insert the Memory Card. page 89 | 4 |
|
2.Set the [Mode] switch to [CARD].
3.Set the [Power] switch to [![Digital Still Camera Mode (SC-DC173(U)/DC175/DC575 only)](/images/backgrounds/7794/7794187xi2.webp)
4.After framing your subject, fully press the [PHOTO] button to take the picture.
The picture is taken and saved into the Memory Card within a few seconds.
Taking another picture within this interval is not possible.
The <Photo capture> indicator appears during the time it takes to save the image.
NotesSaved photo images will appear slightly larger than what is shown on the LCD screen when the photos are taken.
Photo images are saved in the Memory Card in an 800x600 or 1152x864
The number of photo images that can be stored depends on the quality of the image.
Photo capture
94