ENGLISH
Preparation
Using the Lithium Ion Battery Pack
Use the
The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1.Turn the [Power] switch to [OFF].
2.Attach the Battery Pack to the DVD Camcorder.
3.Connect the AC Power
4.Open the DC IN Jack Cover.
5.Connect the DC cable to the DC IN jack on the DVD Camcorder.
The charging indicator will start to blink, showing that the Battery is charging.
6.When the Battery is fully charged, disconnect the Battery Pack and the AC Power Adapter from the DVD Camcorder. Even with the Power switched off, the Battery Pack will still discharge.
Blinking time |
| Charging rate |
Once per second | Less than 50% | |
Twice per second | 50% | ~ 75% |
Three times per second | 75% | ~ 90% |
Blinking stops and stays on | 90% | ~ 100% |
On for a second and off for a | Error - Reset the Battery Pack and | |
second | the DC Cable | |
Power Switch
5
<Charging indicator>
21
