![ENGLISH](/images/backgrounds/7794/7794189x1.webp)
ENGLISH
Digital Still Camera Mode (SC-DC173(U)/DC175/DC575 only)
Viewing Photo Images (JPEG)
This function works only in M.Player Mode. page 26
You can playback and view photo images recorded on a Memory Card.
1.Set the [Mode] switch to [CARD].
2.Set the [Power] switch to [(Player)].
The thumbnail index of photo images appears. If there are no recorded images on the Memory Card, <No file!> is displayed.
3.Use the [Joystick] to select a desired photo images, press the [Joystick].
To change the current thumbnail page, use the [Joystick] to highlight the thumbnail page movement arrows then press the [Joystick] left or right to match the direction of the arrow.
To view a Single Image1.Use the [Joystick] to select a desired photo image, then press the [Joystick].
2.Use the [Joystick] to search for the desired photo image.
To view the next image: move the [Joystick] right.
To view the previous image: move the [Joystick] left.
Press [Joystick] left/right and hold to search for an image quickly. Holding the [Joystick] left or right will not change the displayed image, but the file number will change until the button is released.
When the [Joystick] is released, the selected file will be displayed.
3.To return to thumbnail index, press the [MULTI DISP. ()] button.
1.Use the [Joystick] to select a desired photo image, then press the [Joystick].
2.Press the [S.SHOW] button in the single image display mode.
All images will be played back consecutively for 2~3 seconds each.
The <Slide> is displayed. The Slide Show will start from the current picture. To stop the slide show, press the [S.SHOW] button again.
NotesPhoto
Slide
[1/10]
5/10
Loading time may vary depending on the image size.
Any large sized image taken with another camera will be displayed as a thumbnail image.
95