dubbing videos
DUBBING TO VCR OR DVD/HDD RECORDERS
You can dub videos from you camcorder to other recording devices, such as VCRs or DVD/HDD recorders. When dubbing, connect your camcorder to a wall outlet using the supplied AC power adaptor to ensure a continuous supply of power. Refer to the instruction manuals supplied with the devices you are dubbng to for connection instructions.
PRECHECK!
The camcorder dubs via analog data transfer (composite connection). Use the supplied component/AV cable.
Camcorder
MODE
Q. MENU
INDC
VCR or DVD/HDD recorder
L R
Signal flow
Component/AV cable
1.Turn on your camcorder, and then touch the Play (
) tab.• | Set “TV Type” according to the display device page 102 |
• | Touch Menu ( ) Setting ( )tab “Analog TV Out” “Composite.” page 103 |
3.Connect your camcorder to the Composite video and audio input connections of the recording device (VCR or DVD/HDD recorder) with the supplied component/AV cable.
•Make sure to connect to both the video and audio input jacks.4.Start the playback on your camcorder, and then record it on the recording device.
•Refer to the instruction manuals supplied with your recording device for details.
5.When dubbing is finished, stop the recording device, and then your camcorder.•Refer to the instruction manuals supplied with your recording device for details.
• You can dub videos recorded on this camcorder by connecting it to other recording devices using the supplied component/AV cable. The camcorder dubs all recorded videos in SD (standard definition) image quality, regardless of the recording resolution (HD/SD).
•You cannot dub using an HDMI cable.
•To copy a video recorded in HD (high definition) image quality, use the
•Becasue the camcorder dubs via analog data transfer, the copy’s image quality may be lower.
•To hide the screen indicators (such as the counter, etc.) on the screen of the connected monitor device, set “TV Display: Off.” page 103
•To record the date/time in the copy, display it on the screen. page 102
•When you are connecting your camcorder to a monaural device, connect the green plug of the
122component/AV cable to the video input jack, and the red (right channel) or the white (left channel) plug to the audio input jack on the device.
