ENGLISH
DVD Camcorder: Advanced Recording
Cutting Off Wind Noise (Wind Cut)
The Wind Cut function works only in Camera Mode. page 26
Use the Wind Cut when recording in windy places such as the beach or near buildings.
The Wind Cut function minimizes wind noise or other noise while recording.
- When the Wind Cut is on, some low pitched tones are eliminated along with the sound of the wind.
1. | Set the [Mode] switch to [DISC]. | 4 |
| |
2. | Set the [Power] switch to [ | (Camera)]. | Camera Mode |
|
►Record | ►SP | |||
3. | Press the [MENU] button. |
| Rec Mode | |
| Wind Cut | ►Off | ||
|
|
| ||
4. Move the [Joystick] up or down to select <Record>, then press the [Joystick].
5. Move the [Joystick] up or down to select <Wind Cut>, then press the [Joystick]. |
|
|
Move OK Select MENU Exit | ||
6.To activate the Wind Cut function, move the [Joystick] up or down to select <On>, then press the [Joystick].
7.To exit, press the [MENU] button.
Wind Cut icon (
) is displayed.
Make sure Wind Cut is set to Off when you want the microphone to be as sensitive as possible.
6
7
Camera Mode |
|
►Record |
|
Rec Mode | Off |
Wind Cut | |
| On |
Move OK Select MENU Exit
STBY SP 0:00:00
16:9 Wide
51
