ENGLISH
DVD Camcorder: Before Recording
When using a New Disc: Formatting a new DiscFormatting may be required if a new disc is inserted.
Recognition of the disc will start.
For a
For a
Differences between Video and VR mode
Video (Video Mode) : If the disc has been fi nalized, you will be able to play the disc on most DVD Players/Recorders/Drives.
VR (VR Mode) : You can edit the disc on a DVD Camcorder, but playback is only possible on a DVD Recorder that supports VR mode.
Refer to page 11 for Finalized disc compatibility.
Move the [Joystick] left or right to select <Video> or <VR>, then press [Joystick].
| Please refer to page 123 for disc type descriptions and usage. | <When a | |
| Upon completion, the <Complete!> message will appear. | ||
| |||
| If you select <Cancel>, the <Not formatted!> warning message will appear. |
| |
| Formatting a new disc is required to record on it. To format later, use the <Disc Manager> menu. page 79 | ||
For a DVD+RW disc: You are prompted with the <Disc format? All files will be deleted!> message. Move the [Joystick] left or right to select <Yes>, then press [Joystick].
Upon completion the <Complete!> message will appear.
If you select <No>, the <Not formatted!> warning message will appear.
Formatting a new disc is required to record on it. To format later, use the <Disc Manager> menu. page 79
Removing a Disc1.Push the [OPEN] switch in the direction of the arrow.
The disc cover will partially open.
2.Gently open the cover the rest of the way by hand.
3.Remove the disc.
While pushing down the center portion of the disc spindle, pick up the disc by the edges to remove.
4.Gently push the section marked [PUSH CLOSE] on the disc cover to close it.
NoteThe Finalize/Format functions are not available when the battery level is between 
and 
. 42
