Wi-FiSettings, Wi-FiDirect, Wi-FiDirect Status Indicator

Wi-Fi Settings

The Wi-Fi settings menu allows you to set up many of your device’s advanced Wi-Fi services.

1.From a Home screen, tap Apps > Settings.

2.Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on.

3.Tap Smart network switch to automatically switch between Wi-Fi and mobile networks to maintain a stable Internet connection.

4.Tap More options for options:

•Wi-Fi Direct: Configure a Wi-Fi Direct connection with a nearby device.

-Network notification: Receive a notification when new wireless Access Points (APs) are available.

-Hotspot 2.0: Connect to Hotspot 2.0 enabled Wi-Fi access points without needing a password.

-MAC address: View your device’s MAC address, which is required when connecting to some secured networks (not configurable).

•WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or other equipment.

•WPS PIN entry: View the PIN used by your device to set up a PIN-secured connection to a Wi-Fi router or other equipment

Wi-Fi Direct

Wi-Fi Direct allows direct device-to-device connections through Wi-Fi, without having to connect to a Wi-Fi network.

1.From a Home screen, tap Apps > Settings.

2.Tap Wi-Fi, and then tap On/Off to turn Wi-Fi on. Wi-Fi must be on to configure settings.

3.Tap More options > Wi-Fi Direct. Your device automatically scans for nearby Wi-Fi Direct devices, or you can tap Scan to start scanning.

4.After scanning for devices, select a device, and then follow the prompts to complete the connection.

•To rename your device (as seen by other devices), tap More options > Rename device.

Wi-Fi Direct Status Indicator

Displays when connected to another device using Wi-Fi Direct.