Credential Storage
If a certificate authority (CA) certificate gets compromised or for some other reason you do not trust it, you can disable or remove it.
1.From the Settings screen, touch General tab ➔ Security.2.Touch Storage type to set a storage type for credential contents.3.Touch Trusted credentials.
The trusted credentials screen has two tabs:•System: Displays CA certificates that are permanently installed in the ROM of your device.
•User: Displays any CA certificates that you installed, for example, in the process of installing a client certificate.
4.Touch a CA certificate to examine its details. A scrolling screen displays the details.
Scroll to the bottom of the details screen and touch Turn off to disable a System certificate.
Caution! When you disable a system CA certificate, the Turn off button changes to Turn on, so you can enable the certificate again, if necessary.
Touch OK to return to the certificate list.5.Touch Install from phone storage, then choose a certificate and follow the prompts to install encrypted certificates stored on the USB storage.
Note: You must have installed a memory card containing encrypted certificates to use this feature.
6.Touch Clear credentials to erase the credential contents from the device and reset the password.
Note: This setting only appears if you have installed encrypted certificates.155
