•Mount SD card: Prepare the memory card for use as storage in the tablet. This option is only available if an memory card is installed, and is not already mounted. Normally, your tablet mounts a memory card as soon as you install it.
•Unmount SD card: Prepare an installed memory card for safe removal or formatting.
•Format SD card: Permanently remove all content from an installed memory card. After formatting, the content cannot be retrieved.
Power Saving Mode
Configure Power saving mode settings to conserve battery power.1.Press
and then touch 
> Settings.2.Touch Power saving mode to configure options:Touch ON/OFF to turn Power saving mode On or Off. Power saving mode must be turned On to configure settings.
CPU performance: When enabled, the maximum performance of the tablet’s CPU (Central Processing Unit) is disabled to conserve battery power. Touch the check box next to the option to enable or disable it.
Screen output: When enabled, the frame refresh rate and brightness level are reduced to conserve power. Touch the check box next to the option to enable or disable it.
Note: Touch Learn about Power saving to view information about these settings.Power Saving Tips
Active applications, light levels, Bluetooth usage, and GPS functionality all act to drain your battery. The following is a list of helpful tips that can help conserve your battery power:
●Reduce your backlight time.●Turn Bluetooth off when not in use.●Turn●Turn off GPS location services when not needed. Most applications using this function will periodically query the GPS satellites for your current location; each query drains your battery.
| Settings | 92 |
